T Grid Roll Forming Machine Metal Stud Making Equipment 8-15m / Min
The Main T Bar Machine List
| Machine list | 3 ton passive de-coiler | 2 sets | |
| Hydraulic punching device | 3 sets | |
| Main roll forming machine | 1 set | |
| PLC Control box | 1 unit | |
| Hydraulic station | 1 unit | |
| Locking device for joints | 1 unit | |
| Out table | 2 units | |
| | |
Standard profile and drawing
Technological process:
Decoiler—feedingwithguide—Rollforming——hydraulicPunching——Cutting—Products collecting
The external of machine:
| | Items | Specifications | Remarks |
| Material of coil | Material Thickness | 0.3-0.5 mm galvanized PPGI | |
| De-coiler | Weight | 3 ton manual | |
| Knurls | Two sides | 1 sets of roll | |
| Punching | numbers | 3 sets | |
| Forming system | Rolling Speed | 10-15 m/min | |
| Roller Stations | About 16 stations forming | |
| Roller Material | Gcr15 Steel with quenching | |
| Shaft Material | 45# Steel Diameter 75mm shaft | |
| Maim Motor Power | 7.5 kw | |
| Hydraulic cutting Power | 4 kw | |
| Cutting system | Material Of Cutting | CR12 with quench treatment | |
| Hardness | HRC58-62 | |
| Tolerance | +-1.5mm | |
| Cutting blade | 1 set of cutting blade | |
| Electrical control system | Electric Source | 380V, 50HZ,3 phase | |
| Control System | PLC with touch screen Japanese Panasonic and Yaskawa Brand | |
| Joint system | stations | About 5 stations | |
| Weight | TON | About 3 tons | |
| Way Of Drive | | Gear box | |
| Size of machine | mm | Length 7500mm* Width 800mm* Height 800m | |
Photo of machine component
Decoiler 3 ton passive
Coil inner Diameter: ￠350mm～450mm
Max out diameter of the coil: ￠800mm
Expansion: with 4 palms, with brake
Max Coil Width: 500mm
Cutting way:
(1) Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
(2) Material of blade: CR12 with heat treatment
(3) Length measuring: Automatically
(4) Tolerance of length: + 0.5mm
(5) In order to get the perfect profiles, we recommend the post hydraulic cutting by changing the cutting moulds. It is easy to operate.
Control Box
- (1) Power supplier: 440V, 50 Hz, 3Phase (adjusted with the requestment)
- (2) Length & quantity measurement automatically;
- (3) Length & quantity controlled by PLC,
- (4) Length inaccuracy can be amended easily.
- (6). Control panel: Button-type switch and touch screen
- (7) The language in the touch screen: English and Chinese
- (8) Unit of length: millimeter (switched on the control panel)
Loading
Product Tags:
|
|
0.3-0.5mm Material thickness T Grid Roll Forming Machine Metal Stud Making Equipment 8-15m / Min Images
|
